Bad Boy 5045H

The Bad Boy 5045H delivers 45 HP of diesel-powered performance with a hydrostatic transmission and 4WD for maximum efficiency and control. Compact yet capable, it’s built for demanding tasks on farms, job sites, or large properties—offering front loader compatibility, a Category 1 hitch, and intuitive operation.

The specifications below may not represent all the available trim levels. Speak with a Sales Professional for more information.

Call Today at 903-527-4449

Specs

ENGINE                                               HYDRAULIC SYSTEM

Type: 4-cylinder, Water-cooled                                               Implement pump (gpm): 9.3

Model: A2300N2                                                                    Steering pump (gpm): 4.4

Engine HP (Gross): 48                                                           Total flow (gpm): 13.7

PTO HP: 38.4                                                                         Category, 3 pt hitch: CAT 1

Rated Speed (RPM): 2600                                                    Hitch Lift capacity (lb.): 3,306

Displacement (cu in): 139.5                                                   Lift control type: Manual Position

Fuel Tank Capacity (gal): 11.8

Alternator: 12V – 50 Amps


DRIVE TRAIN                                   DIMENSION

Transmission: Hydrostatic Drive                                        Overall length with 3pt (in.): 127.4

No. of Speeds: 4 Ranges                                                   Wheelbase (in.): 71.1

Brakes: Wet, Multi Disc                                                      Min. overall width with IND tires (in.): 64.9

Steering: Hydrostatic Power Steering                                Height to top of ROPS (in.): 98.4


PTO                                                  TIRE SIZE

Type: Independent                                                             Industrial Front/Rear: 9.5 – 16.0

Mid PTO: Standard (2000 rpm)                                         Turf Front/Rear: 12.4 – 28.0

Rear PTO: Standard (540 rpm)


WEIGHT

Total weight without ballast (lbs): 3,754

Attachments

BBL500 LOADER
  • Maximum Lift Height (@ pivot point) (In): 107.7
  • Maximum Lift Height under lever bucket (In): 98.6
  • Clearance with bucket dump (In): 82.3
  • Reach at maximum lift height (In): 16.5
  • Maximum dump angle: 46
  • Reach with bucket on ground (In): 67.0
  • Maximum rollback angle: 34
  • Digging Depth (In): 2.4
  • Overall, Height in carry position: 55.3
  • Depth of attachment (In): 20.9
  • height of attachment (In): 21.1
  • length of attachment (to pivot pin): 27.2
BBH500 BACKHOE
  • Digging Depth (In): 91.2
  • Reach from center line of Swing Pivot (In): 123.6
  • Loading Height (Bucket @ 60 Degrees) (In): 69.3
  • Maximum Leveling Angle: 10
  • Swing Angle: 180
  • Transport overhang (In): 49.2
  • Bucket Rotation: 180
  • Stabilizer Spread (Down Position) (In): 88.8
  • Stabilizer Spread (Raise Position) (In): 68.4
  • Angle Departure: 21